Products > Environment > Emission > Heavy Metal

Features and Benefits

菱形图标.pngSimultaneously analyzing 28 most regular heavy metal elements, others scalable.

菱形图标.pngHigh sensitivity, lower detection limit down to ng/m3.

菱形图标.pngTruly continuous and non-destructive measurement, no pretreatment needed.

菱形图标.pngNo chemical, no liquid waste, reliable and less maintenance

菱形图标.png13 patents borne by the single analyzer

菱形图标.pngRadiation safety certified.

Measuring principle

 X-rays are used to expel tightly held electrons from the inner orbitals of the atom. The removal of an electron in this way makes the electronic structure of the atom unstable, and electrons in higher orbitals ‘fall’ into the lower orbital to fill the hole left behind. Each of these transitions yields a fluorescent photon with a characteristic radiation equal to the difference in energy of the initial and final orbital. The fluorescent radiation is then analyzed by separating the characteristic wavelengths (qualitative) and detecting intensity of each characteristic radiation (quantitive).



Technical Data

Technical     PrincipleX-ray   Fluorescence
Installation     typeExtractive
Measuring     ElementPb,   Hg, Cd, Cr, As, Cu, Zn, Ni, Fe,   Ag, Mn, Ca, K, etc. totally 28 heavy metal   elements
Measurement     Range0~2000μg/m3
Detection     Limit0.1μg/m3
LinearityCorrelation   coefficient >0.99
Accuracy<   1.5%(Pb)
Gas     Temperature(-20~600)℃
Gas     Pressure(-20~50)   KPa
Sampling     & Analysis Period10~120mins   (Selectable)
Filter     tape consumptionReplace   every 3 months
Size1500×1200×480mm   (H×W×D)
WeightAround   100kg